Installation

Contents of Koala Bottle

Your purchase of the Koala Bottle includes (1) a Koala Bottle branded BPA free bottle, (2) a coated magnetic ring, (3) a recyclable plastic bottle cage with preinstalled magnets and (4) two 5mm bolts with washers.

Installation of Koala Bottle

Installation of the bottle cage must be only with the bolts and washers included with your purchase. Do not over tighten the bolts during installation.  Although made of highly durable plastic, use of excessive force during installation of the bottle cage may cause permanent damage to the plastic. The bottle cage must always be installed so that the bottle is held right side up.

Bicycle Installation

Align the bottom bolt of the bottle cage (the Anchor bolt hole) with the corresponding bottom bolt hole on the bicycle frame. Fasten a 5mm bolt and washer into the bicycle frame with the washer between the head of the bolt and the bottle cage.  Turn the bolt with a 5mm hex wrench until the bottle cage is securely on the bike; again, do not over tighten. Second, align the elongated (Slotted) bolt hole with the corresponding bolt hole on the bicycle frame and fasten until the bottle cage is secure.